40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Mon Sep 19 15:41:48 2011, Jenne, Update, SUS, SUS diag stuff... just so I remember what I'm doing 
    Reply  Mon Sep 19 22:47:44 2011, Jenne, Update, SUS, SUS diag stuff... just so I remember what I'm doing 
       Reply  Tue Sep 20 16:45:09 2011, Jenne, Update, SUS, SUS diag stuff... just so I remember what I'm doing 
          Reply  Wed Sep 21 00:34:29 2011, rana, Update, SUS, SUS diag stuff... just so I remember what I'm doing 
Message ID: 5485     Entry time: Tue Sep 20 16:45:09 2011     In reply to: 5471     Reply to this: 5493
Author: Jenne 
Type: Update 
Category: SUS 
Subject: SUS diag stuff... just so I remember what I'm doing 

Has the Q been checked?  Still in progress...

Optic POS PIT YAW SIDE
ITMX  done  done done done
ITMY  done  done  fine??  done
ETMX  done  done  done  done
ETMY  done  done  done  done
BS  done  done  done  done
PRM done done done done
SRM done done done done
MC1        
MC2        
MC3        

 So, update as of 6:17pm:  I have tuned the damping gains for all IFO optics.  Everything is good, except for ITMY Yaw.  It's probably fine, the optic damps okay, but it doesn't look like a nice clean ringdown.  I haven't taken the time to go back and look at it again.

I have to go to a dinner, but later (probably in the morning, so I don't disturb evening locking) I'll check the MC Qs.

ELOG V3.1.3-