40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry  Sat Sep 10 14:55:28 2011, Keiko, Update, LSC, 3f demodulation board check 
    Reply  Sat Sep 10 16:10:42 2011, Keiko, Update, LSC, 3f demodulation board check REFL33-input-filter.png
       Reply  Sat Sep 10 18:57:52 2011, Keiko, Update, LSC, 3f demodulation board check 
          Reply  Sun Sep 11 15:19:39 2011, kiwamu, Update, LSC, phase delay in RF signals 
       Reply  Sun Sep 11 22:36:32 2011, Keiko, Update, LSC, 3f demodulation board check REFL33.pngREFL165.png
          Reply  Mon Sep 12 13:24:07 2011, Keiko, Update, LSC, 3f demodulation board check 
             Reply  Mon Sep 12 16:27:01 2011, Keiko, Update, LSC, 3f demodulation board check 
                Reply  Mon Sep 12 18:40:35 2011, Keiko, Update, LSC, 3f demodulation board check 
                   Reply  Tue Sep 13 15:00:25 2011, Keiko, Update, LSC, 3f demodulation board check WF33.pdfWF165.pdf
                      Reply  Tue Sep 13 23:08:51 2011, Keiko, Update, LSC, 3f demodulation board check REFL33-modified.pngREFL165-modified.png
                         Reply  Thu Sep 15 01:06:20 2011, Keiko, Update, LSC, 3f demodulation board check 
                            Reply  Fri Sep 16 21:26:12 2011, Keiko, Update, LSC, 3f demodulation board check 
Message ID: 5377     Entry time: Sat Sep 10 14:55:28 2011     Reply to this: 5378
Author: Keiko 
Type: Update 
Category: LSC 
Subject: 3f demodulation board check 

 To check the demodulation boards for REFL33 and REFL165, a long cable from ETMY (SUS-ETMY-SDCOIL-EXT monitor) is pulled to the rack on Y side.

(1) A filter just after the RF input and (2) transfer function from the RF input to the demodulated signal will be checked for the two 3f demod boards to confirm that they are appropriate for 33 and 165 MHz.

ELOG V3.1.3-