40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Aug 10 14:27:39 2011, Ishwita , Manuel, Update, PEM, Calibration of Guralp and STS2 
    Reply  Wed Aug 10 14:35:39 2011, rana, Update, PEM, Calibration of Guralp and STS2 
       Reply  Wed Aug 10 15:17:39 2011, Ishwita, Manuel, Update, PEM, Calibration of Guralp and STS2 
          Reply  Thu Aug 11 09:39:25 2011, Ishwita, Manuel, Update, PEM, Calibration of Guralp and STS2 pw_gurs_aug11.png
             Reply  Thu Aug 11 11:50:56 2011, Manuel , Ishwita, Update, PEM, Calibration of Guralp and STS2 
                Reply  Thu Aug 11 16:15:59 2011, Ishwita, Manuel, Update, PEM, Calibration of Guralp and STS2 
Message ID: 5187     Entry time: Thu Aug 11 11:50:56 2011     In reply to: 5185     Reply to this: 5196
Author: Manuel , Ishwita 
Type: Update 
Category: PEM 
Subject: Calibration of Guralp and STS2 

 

 We just checked with a function generator the calibration of the ADC. We set a square wave with amplitude 1V. We measured the voltage with the oscilloscope and we found on the data viewer that one volt is 3208 counts. That's what we expected (+/- 10V for 16bits) but now we are more sure.

 

ELOG V3.1.3-