40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Aug 10 13:52:23 2011, Manuel , Ishwita, Update, PEM, Moving Seismometers 
    Reply  Thu Aug 11 10:56:08 2011, Ishwita, Manuel, Update, PEM, Moving Seismometers 
Message ID: 5186     Entry time: Thu Aug 11 10:56:08 2011     In reply to: 5171
Author: Ishwita, Manuel 
Type: Update 
Category: PEM 
Subject: Moving Seismometers 

Quote:

We turned off the power of the seismometers and moved the Guralp1 close to the STS. Both are now situated below the center of the mode cleaner vacuum tube.

We oriented the X axis of the STS & Guralp1 along the X axis of the interferometer. Then we turned on the power again, but the STS channels don't give any signal. We think this is, because we didn't push the auto zero button.

 After pressing the auto-zero button (a lot of times) of the STS breakout box & aligning the bubble in the STS, we could finally get data from STS (Bacardi). So, now STS2 (Bacardi - Serial NR. 100151) is working!

ELOG V3.1.3-