40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Aug 10 11:22:55 2011, Suresh, Update, IOO, MC A2L alignment 
    Reply  Wed Aug 10 14:30:55 2011, kiwamu, Update, IOO, Re: MC A2L alignment 
Message ID: 5173     Entry time: Wed Aug 10 14:30:55 2011     In reply to: 5167
Author: kiwamu 
Type: Update 
Category: IOO 
Subject: Re: MC A2L alignment 

I modified a set of the automated MC locking scripts which are dedicated for the low power MC.

Currently there are three scripts like the usual MC locking scripts:

(1)mcup_low_power, (2) mcdown_low_power and (3) autolockMCmain40_low_power.

I ran those scripts on op340m as usual and so far they are running very well. The lock acquisition is quite repeatable.

I hope theses scripts always bring the lock condition to the same one and hence the LOCKIN signals don't change by every lock.

 

- To run the script

  log into op340m and run autolockMCmain40m_low_power

Quote from #5167

And the MC settles into a new position when the MC-PSL servo loop was disturbed by random denizens in the lab.  Requiring us to start over again.

 

ELOG V3.1.3-