[Manuel, Ishwita, Jenne, Jamie]
We changed the C1PEM model and the names of the C1:PEM channels.
We reinstalled the blue breakout box, since the purple one still didn't work.
So, now the AA board channels are connected as follows...
C1 = C1:PEM-SEIS_GUR1_X
C2 = C1:PEM-SEIS_GUR1_Y
C3 = C1:PEM-SEIS_GUR1_Z
C4 = C1:PEM-SEIS_GUR2_X
C5 = C1:PEM-SEIS_GUR2_Y
C6 = C1:PEM-SEIS_GUR2_Z
C7 = C1:PEM-SEIS_STS_1_X
C8 = C1:PEM-SEIS_STS_1_Y
C9 = C1:PEM-SEIS_STS_1_Z
C11 = C1:PEM-SEIS_STS_2_X
C12 = C1:PEM-SEIS_STS_2_Y
C13 = C1:PEM-SEIS_STS_2_Z
C14 = C1:PEM-SEIS_STS_3_X
C15 = C1:PEM-SEIS_STS_3_Y
C16 = C1:PEM-SEIS_STS_3_Z
C17 = C1:PEM-ACC_MC1_X
C18 = C1:PEM-ACC_MC1_Y
C19 = C1:PEM-ACC_MC1_Z
C20 = C1:PEM-ACC_MC2_X
C21 = C1:PEM-ACC_MC2_Y
C22 = C1:PEM-ACC_MC2_Z
Although the channels for all 3 STS-2 seismometers are made but only one is installed. So only Channels C1 to C9 are now in operation...
We checked the data from the plugged channels with the Dataviewer. We could see the peak whenever someone jumped in the lab. Even Kiwamu jumped and saw his signal. |