40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Jul 20 14:42:34 2011, steve, Update, SUS, oplev gains today 
    Reply  Wed Jul 20 19:24:12 2011, rana, Update, SUS, oplev gains today Untitled.pnga.png
       Reply  Wed Jul 20 19:48:03 2011, Jamie, Update, SUS, Re: oplev gains today 
       Reply  Thu Jul 21 09:04:59 2011, valera, steve, Update, SUS, oplev gains were not optimized 
       Reply  Mon Jul 25 00:35:44 2011, rana, Update, SUS, something wrong with ETMY LR sensor a.pngbad.png
          Reply  Tue Jul 26 11:38:45 2011, steve, Update, SUS, ETMY bias checked 
    Reply  Thu Jul 21 16:06:35 2011, steve, Update, SUS, oplev gains today checked by conlog 
Message ID: 5005     Entry time: Wed Jul 20 19:48:03 2011     In reply to: 5004
Author: Jamie 
Type: Update 
Category: SUS 
Subject: Re: oplev gains today 

 

 We have been modifying models that need to have their channels renamed to run activateDQ when Joe's post_build_script to is run. 

The trick is to integrate things to get the post_build_script running after every model build (getting it hooked in to the make file somehow).  We're working on it.

 I've added the following epics channels to sus_single_control model using the epicsOutput part:

  • OL_SUM
  • OL_PITCH
  • OL_YAW

These channels are now all available.  I'm not exactly sure how to ensure that they're being trended.  I'll check that tomorrow.

ELOG V3.1.3-