40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 4979     Entry time: Sat Jul 16 18:54:05 2011
Author: Ishwita, Manuel 
Type: Configuration 
Category: Electronics 
Subject: AA board 

We fixed the anti-aliasing board in its aluminum black box,  the box couldn't be covered entirely because of the outgoing wires of the BNC connectors, so we drilled additional holes on the top cover to slide it backwards by 1cm and then screw it.

We had to fix the AA board box in rack 1X7, but there wasn't enough space, so we tried to move the blue chassis (ligo electro-optical fanout chassis 1X7) up with the help of a jack. We removed the blue chassis' screws but we couldn't move it up because of a piece of metal screwed above the blue chassis, then we weren't able to screw the two bottom screws again anymore because it had slided a bit down. Thus, the blue chassis (LIGO ELECTRO-OPTICAL FANOUT CHASSIS 1X7) is still not fixed properly and is sitting on the jack.

To accommodate the AA board (along with the panel-mounted BNC connectors) in rack 1X7 we removed the sliding tray (which was above the CPU) and fixed it there. Now the sliding tray is under the drill press.

 

Attachment 1: DSC_3236.JPG  1.259 MB  | Hide | Hide all
DSC_3236.JPG
Attachment 2: pic1.png  7.895 MB  | Hide | Hide all
pic1.png
Attachment 3: DSC_3237.JPG  1.269 MB  | Hide | Hide all
DSC_3237.JPG
ELOG V3.1.3-