40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Jul 5 18:57:10 2011, Jamie, Update, SUS, More normalization of all sus controllers 
    Reply  Tue Jul 5 21:26:51 2011, rana, Update, SUS, More normalization of all sus controllers Screenshot-1.png
       Reply  Wed Jul 6 02:12:36 2011, kiwamu, Update, SUS, Re : More normalization of all sus controllers 
          Reply  Wed Jul 6 10:35:35 2011, Jamie, Update, SUS, Re : More normalization of all sus controllers 
             Reply  Wed Jul 6 15:32:32 2011, Jamie, Update, SUS, Re : More normalization of all sus controllers 
       Reply  Wed Jul 6 11:45:20 2011, Jamie, Update, SUS, More normalization of all sus controllers 
Message ID: 4945     Entry time: Wed Jul 6 11:45:20 2011     In reply to: 4942
Author: Jamie 
Type: Update 
Category: SUS 
Subject: More normalization of all sus controllers 

Quote

I'm attaching a screenshot of some of the problems I see so far with MC3.

I tried to fix all of the problems that I could identify in this screen shot:

  • Fixed the TO_COIL output filter matrix screen to correctly point to the matrix element filter screens (all SUS)
  • Removed MCL sections from SUS_XXX_POSITION screens, except for MC2.  I also modified the _POSITION screens for the ETMs to refer to ALS instead of MCL.
  • Zeroed out all of the lockin gains in the TO_COIL matrices (MC SUS)
  • Made sure all whitening filter were ON (all SUS)
  • Made sure all cts2um calibration filters were on (all SUS)
  • Made sure all oplev servos were on (all SUS)
ELOG V3.1.3-