40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Jul 1 07:01:23 2011, Suresh, Update, IOO, WFS2 resonances and installation WFS2new.pdf
    Reply  Fri Jul 1 11:47:25 2011, rana, Update, IOO, WFS2 resonances and installation Screen_shot_2011-07-01_at_11.13.01_AM.png
Message ID: 4927     Entry time: Fri Jul 1 07:01:23 2011     Reply to this: 4928
Author: Suresh 
Type: Update 
Category: IOO 
Subject: WFS2 resonances and installation 

This was the WFS whose photodiode was repaced as the old one was found to be damaged. 

I retuned the resonances and the notches of all the quadrant and have attached a pdf file of my measurements.


Some notes:

a)  The variable inductor on WFS2Q2 quadrant may need to be changed. The ferrite code has come of the solinoid and is just held in place due to friction..  It may be easily disturbed.    So though i chose to leave it in place for now,  it will need to be replace in case the Q3 misbahaves..

b) In general the frequencies have shifted a bit when I closed the lid of tne WFS sensor head.


WFS1 and 2 have been installed on the AP table and are functional. I am shifting attention to the software.


Attachment 1: WFS2new.pdf  73 kB  | Hide | Hide all
WFS2new.pdf WFS2new.pdf WFS2new.pdf WFS2new.pdf
ELOG V3.1.3-