40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 4926     Entry time: Thu Jun 30 21:55:16 2011
Author: rana 
Type: Configuration 
Category: DAQ 
Subject: NDS2 conf change 

As I recently had trouble getting all of the SUS SENSOR channels at once from NDS2, I asked J.Z. for help. He found that the number of buffers on mafalda was set to only allow a small amount of data to be requested at one time.

He's going to have to figure out a more permanent fix, but for now he's increased the data buffer size to allow somewhat larger chunks to be gotten. I have made a work around in matlab, which gets smaller chunks and then cats them together.

Its in SUS/peakFit/.

Attachment 1: Untitled.png  176 kB  Uploaded Thu Jun 30 23:03:24 2011  | Hide | Hide all
Untitled.png
ELOG V3.1.3-