40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Jun 30 01:50:02 2011, Jenne, Update, SUS, ITMX whitening, ETMX left free swinging 
    Reply  Thu Jun 30 11:36:54 2011, Jamie, Update, SUS, Re: ITMX whitening, ETMX left free swinging 
Message ID: 4921     Entry time: Thu Jun 30 11:36:54 2011     In reply to: 4916
Author: Jamie 
Type: Update 
Category: SUS 
Subject: Re: ITMX whitening, ETMX left free swinging 

Quote:

While closing up the whitening shop for the night, I noticed that the ITMX whitening state (Whitening "On") is opposite that of all other suspensions (they all have Whitening "Off").  I don't know which way is correct, but I assume they should all be the same.  Once all the whitening and BO testing is done, we should make sure that they're all the way we want them to be.

This was certainly my fault, probably left over from early debugging of my BO switch check script.  I've turned the ITMX whitening all off, to match the other suspensions.

Quote

Also, Koji and I are leaving ETMX free swinging.  That's the way we found it, presumably from Jamie's BO testing at the end station today.  We don't know what the optic's story is, so we're leaving it the way we found it.  Jamie (or whomever left it free swinging), can you please restore it when it is okay to do so?  Thanks!

Again, this was my fault.  Sorry.  I just accidentally left this off when I finished yesterday.  Much apologies.  I've turned the ETMX watchdog back on.

ELOG V3.1.3-