40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 4919     Entry time: Thu Jun 30 07:42:48 2011
Author: Suresh 
Type: Update 
Category: IOO 
Subject: AP Table Power levels 

I measured the power in various beams on the AP table to check and see if any beam is having too much power. 

I am uploading two pics one is in the "high power state" and the other is the "low power state".   High power in the MC REFL PD occurs when the MC is unlocked.  In addition the WFS also will see this  hike in power. We wish to make sure that in either state the power levels do not exceed the max power that the PDs can tolerate.



Low Power state: MC locked, PRM not aligned.                                                   High Power state: MC unlocked,  PRM aligned.


AS-lowP_state.pdf             AS-highP_state.pdf

ELOG V3.1.3-