40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry  Thu Jun 16 00:43:36 2011, Koji, Update, SUS, Vertex SUS Binary Output Boxes were turned off / need investigation 
    Reply  Thu Jun 16 08:45:14 2011, steve, Update, SUS, Vertex SUS Binary Output Boxes removed P1070894.JPG
       Reply  Thu Jun 16 23:19:09 2011, Koji, Update, SUS, Vertex SUS Binary Output Boxes removed 
Message ID: 4827     Entry time: Thu Jun 16 00:43:36 2011     Reply to this: 4828
Author: Koji 
Type: Update 
Category: SUS 
Subject: Vertex SUS Binary Output Boxes were turned off / need investigation 

- I was investigating the SUS whitening issue.

- I could not find any suspension which can handle the input whitening switch correctly.

- I went to 1X5 rack and found that both of the two binary output boxes were turned off.
As far as I know they are pulling up the lines which are switched by the open collector outputs.

- I tried to turn on the switch. Immediately I noticed the power lamps did not work. So I need an isolated setup to investigate the situation.

- The cables are labelled. I will ask steve to remove the boxes from the rack.

ELOG V3.1.3-