40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu May 12 05:25:26 2011, kiwamu, Update, IOO, IP_POS disconnected 
    Reply  Thu May 12 08:54:11 2011, steve, Update, IOO, IP_POS cable found 
       Reply  Thu May 12 18:21:19 2011, kiwamu, Update, IOO, welcome back IP_POS 
          Reply  Thu May 12 22:54:20 2011, rana, Update, DAQ, Input Beam Naming change (no more IP) 
          Reply  Sun May 15 14:01:56 2011, kiwamu, Update, IOO, wiring diagram for IP-POS ip_pos.png
             Reply  Mon May 16 11:14:36 2011, rana, Update, IOO, wiring diagram for IP-POS 
Message ID: 4700     Entry time: Thu May 12 08:54:11 2011     In reply to: 4699     Reply to this: 4704
Author: steve 
Type: Update 
Category: IOO 
Subject: IP_POS cable found 

Quote:

A cable for IP_POS has been disconnected at the LSC rack, 1Y2. Due to it currently no IP_POS signal shows up on the digital side.

It looks like we disconnected the cable together with some unused cables when we were cleaning up the wiring of the LSC rack.

The cable, a shielded flat-cable, is supposed to send DC power to the QPD and send the signals from the QPD to an interface board on the LSC rack.

I will check how it used to be and reconnect it.

 I found the disconnected cable, but I do not see the interface board at the LSC rack

ELOG V3.1.3-