40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Mon Mar 28 21:12:14 2011, Jenne, Update, PSL, New PMC Base Riser Design PMC_riser.eprt
    Reply  Mon Mar 28 22:56:14 2011, rana, Update, PSL, New PMC Base Riser Design 
       Reply  Mon Mar 28 23:51:54 2011, Jenne, Update, PSL, New PMC Base Riser Design 
Message ID: 4454     Entry time: Mon Mar 28 23:51:54 2011     In reply to: 4453
Author: Jenne 
Type: Update 
Category: PSL 
Subject: New PMC Base Riser Design 

Quote:

Its going to need some kind of way to locate the PMC on the top. In the previous design, we had the 3 balls to decouple the body from the base. That design was flawed due to the roughness of the holes in the PMC body.

 Hmmm, so, this was just meant to be a riser that goes underneath the old PMC mount, to raise it from 3" beam height to 4" beam height.  I will make another one that is a complete mount, designed for 4" beam height.  Please hold........... .......... ....... ..... ... .

ELOG V3.1.3-