The DAQ Wiki pages say to use port 8088 for restarting the Frame Builder. I tried this to no avail.
op440m:daq>telnet fb 8088Trying 192.168.113.202...Connected to fb.martian.Escape character is '^]'.^]telnet> quitConnection to fb.martian closed.op440m:daq>telnet fb 8087Trying 192.168.113.202...Connected to fb.martian.Escape character is '^]'.daqd> shutdownOKConnection to fb.martian closed by foreign host.
Apparently, 8087 is the right port. Various elog entries from Joe and Kiwamu say 8087 or 8088. Not sure what's going on here.
After figuring this out, I activated the C1:GCV-XARM_COARSE_OUT_DAQ and C1:GCV-XARM_FINE_OUT_DAQ and set both of them to be recorded at 2048 Hz. We are loading filters and setting gains into these filter modules such that the OUT signals will be calibrated into Hz (that's why we used the OUT instead of the IN1 as there was last night).