40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Mon Dec 13 21:03:30 2010, Kevin, Update, Electronics, RF Photodiode Characterizations 
    Reply  Tue Dec 14 04:14:53 2010, rana, Update, Electronics, RF Photodiode Characterizations 
Message ID: 4051     Entry time: Tue Dec 14 04:14:53 2010     In reply to: 4048
Author: rana 
Type: Update 
Category: Electronics 
Subject: RF Photodiode Characterizations 

This is looking better, but the fit data for the TF should be plotted along with the data. The data should be made up of points and the fit a line.

For the fit, we should have the Q of the main resonance as well as the peak height of the main resonance and the values of the gain at the notch frequencies.

Also the peak as well as the notches should have the frequencies fit for and labeled. In principle, you can make the plot on the wiki have all of the data. Then in the end we can print the plot in a small size and glue it to the PD's backside.

ELOG V3.1.3-