40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Sat Nov 6 07:26:54 2010, yuta, Summary, IOO, reduced common mode displacement of the beam through MC1 to MC3 A2LMCalign.png
    Reply  Tue Nov 9 05:40:12 2010, yuta, Summary, IOO, MC aligning going on MCalignNov9.png
       Reply  Wed Nov 10 02:51:35 2010, yuta, Summary, IOO, limitation of current MC aligning MCalignNov9.png
          Reply  Wed Nov 10 11:46:19 2010, Koji, Summary, IOO, limitation of current MC aligning 
             Reply  Wed Nov 10 12:21:18 2010, yuta, Summary, IOO, limitation of current MC aligning 
                Reply  Wed Nov 10 14:28:33 2010, Koji, Summary, IOO, limitation of current MC aligning 
Message ID: 3886     Entry time: Wed Nov 10 12:21:18 2010     In reply to: 3885     Reply to this: 3887
Author: yuta 
Type: Summary 
Category: IOO 
Subject: limitation of current MC aligning 

1. We didn't measure the aperture size last night. We have to check that.

2. We have to measure the length of FI. Or find a document on this FI.

3. Yes, 5%/sqrt(4). But I didn't think the factor of 2 is important for this kind of estimation.

ELOG V3.1.3-