There currently seems to be a timing issue with the frame builder. We switched over to using a symmetricom card to get an IRIG-B signal into the fb machine, but the gps time stamp is way off (~80 years Alex said).
If there is a frame buiilder issue, its currently often necessary to kill the associated mx_stream processes, since they don't seem to restart gracefully. To fix it the following steps should be taken:
Kill frame builder, kill the two mx_stream processes, then /etc/restart_streams/, then restart the frame builder (usual daqd -c ./daqdrc >& ./daqd.log in /opt/rtcds/caltech/c1/target/fb).
To restart (or start after a boot) the nds server, you need to go to /opt/rtcds/caltech/c1/target/fb and type
At this time, testpoints are kind of working, but timing issues seem to be preventing useful work being done with it. I'm leaving with Alex working on the code.