40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Aug 6 15:50:29 2010, Gopal, Update, Optic Stacks, (Much Better Looking) Displacement-Displacment Transfer Functions MC1_MC3_XTrans.pngMC1_MC3_YTrans.pngMC1_MC3_ZTrans.png
    Reply  Fri Aug 6 19:46:59 2010, Gopal, Update, Optic Stacks, (Much Better Looking) Displacement-Displacment Transfer Functions 
Message ID: 3376     Entry time: Fri Aug 6 15:50:29 2010     Reply to this: 3380
Author: Gopal 
Type: Update 
Category: Optic Stacks 
Subject: (Much Better Looking) Displacement-Displacment Transfer Functions 

I reran the FDA in COMSOL on the MC1/MC3 Stack and produced the following Displacement-Displacement Transfer Functions:

X-Translational Drive has a blue background

Y-Translational Drive has a red background

Z-Translational Drive has a green background

Obtaining the Displacement-to-Phase part of the Transfer Function still produces difficulties -- I'm still working on the COMSOL-Matlab interface to perhaps better facilitate this.

RA: I have deleted those plots because they weren't transfer functions. Transfer functions must always be the ratio of something to something. For example: if I had a nickel for every bad plot I see, I would be a millionaire. In that example, the transfer function would have the units of nickels/plots. For the stacks, it should be meters/meter.

 

Attachment 1: MC1_MC3_XTrans.png  97 kB  Uploaded Sat Aug 7 11:27:13 2010  | Hide | Hide all
MC1_MC3_XTrans.png
Attachment 2: MC1_MC3_YTrans.png  98 kB  Uploaded Sat Aug 7 11:27:25 2010  | Hide | Hide all
MC1_MC3_YTrans.png
Attachment 3: MC1_MC3_ZTrans.png  95 kB  Uploaded Sat Aug 7 11:27:37 2010  | Hide | Hide all
MC1_MC3_ZTrans.png
ELOG V3.1.3-