40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Aug 3 11:50:16 2010, Jenne, Update, PEM, Seismometer Problem Tracked down 
    Reply  Wed Aug 4 03:01:56 2010, Jenne, Update, PEM, Catastrophic Cable Failures 
Message ID: 3354     Entry time: Tue Aug 3 11:50:16 2010     Reply to this: 3356
Author: Jenne 
Type: Update 
Category: PEM 
Subject: Seismometer Problem Tracked down 

After some cable swapping this morning, I have determined which cable is bad.  It's the Gur1 cable between the seismometer and the breakout box.  This is a milspec -> 37pin d-sub cable.  I'll pull out the cable and have a look at it after lunch.

ELOG V3.1.3-