ELOG - control room AC set point changed

40m Log

Not logged in

List | Find | Login | Help

Fri Jul 23 15:32:02 2010, steve, Update, PEM, control room AC set point changed

Message ID: 3277 Entry time: Fri Jul 23 15:32:02 2010 Reply to this: 3288

Author:	steve
Type:	Update
Category:	PEM
Subject:	control room AC set point changed

The control room temp is warmer than usual. The heat exchanger Office Pro 18 set point was lowered from 70 to 68F yesterday.

The MOPA headtemp is higher also. The Neslab chiller bath temp peaks around 21.6 C daily. This should be rock solid 20.00 C

It did not have any effect.

Now, I have just lowered the thermostat setting of room 101 from 73 to71F I hope Koji can take this.