40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
40m Log |
Not logged in |
 |
|
Fri Jul 9 20:16:19 2010, rana, Summary, PSL, Things I did to the PSL today: Refcav, PMC, cameras, etc.
|
Sun Jul 11 20:11:48 2010, rana, Summary, PSL, RC trend after the insulation removal
|
Thu Jul 15 19:27:04 2010, rana, Summary, PSL, RC trend after the insulation removal  
|
Mon Jul 12 14:22:36 2010, Jenne, Summary, PSL, Things I did to the PSL today: Refcav, PMC, cameras, etc.
|
|
Message ID: 3196
Entry time: Mon Jul 12 14:22:36 2010
In reply to: 3189
|
Author: |
Jenne |
Type: |
Summary |
Category: |
PSL |
Subject: |
Things I did to the PSL today: Refcav, PMC, cameras, etc. |
|
|
Quote: |
I re-aligned the beam into the PMC. I got basically no improvement. So I instead changed the .LOW setting so that PMCTRANS would no longer go yellow and make the donkey sound.
I did the same for the MOPA's AMPMON because its decayed state is now nominal.
|
[Jenne, Chip]
The alarm was still going, because the LOLO setting was higher than the LOW, which is a little bit silly. So we changed the .LOLO setting to 0.80 (the LOW was set to 0.82)
We also changed psl.db to reflect these values, so that they'll be in there the next time c1psl gets rebooted. |