The magnets + dumbbell standoffs have been glued to ITMX. We're waiting overnight for them to dry.
Since I broke one of the magnet + dumbbells on the ITMY set, we've glued another dumbbell to the 6th magnet, and it should be ready for us to glue to ITMY tomorrow, once ITMX is dry and out of the fixture. This doesn't put us behind schedule at all, so that's good.
We had been concerned that there might be a problem with the arm of the guiderod fixture being glued to ITMY, but it was fine after all. Everything is going smoothly so far.
Zach and Mott are almost prepared to start cutting the viton for the earthquake stops. We need 2 full sets by Wednesday morning, when we expect to begin hanging the ITMs.