40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 1714     Entry time: Thu Jul 2 06:31:35 2009
Author: Clara 
Type: Update 
Category: PEM 
Subject: First mic in place and connected 

I clamped Bonnie (microphone) to the top of a chamber near the vertex of the arms and placed Clyde (pre-amp) on the table right below (see picture). The cable was laid and Bonnie and Clyde are plugged into port #13 on the ADC. The second cable was plugged into port #14, but it is not connected to anything. I placed the looped up cable on top of the cabinet holding the ADC.

Note: the angle in the photograph is such that we are looking along the y-arm.


Attachment 1: bonnieandclyde.JPG  295 kB  Uploaded Thu Jul 2 07:32:29 2009  | Hide | Hide all
bonnieandclyde.JPG
ELOG V3.1.3-