|
40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
| 40m Log |
Not logged in |
 |
|
|
 Wed Mar 9 11:52:18 2022, Yehonathan, Update, BHD, Simplified BHD readout sketch on ITMY table 
|
 Wed Mar 9 12:57:52 2022, Koji, Update, BHD, Simplified BHD readout sketch on ITMY table
| |
Fri Apr 1 14:26:50 2022, Tega, Update, Optical Levers, Simplified sketch on MC table
| |
Fri Apr 1 17:02:02 2022, Koji, Update, Optical Levers, Simplified sketch on MC table
| |
Fri Apr 1 22:22:29 2022, Koji, Update, Optical Levers, Simplified sketch on MC table
| |
Mon Apr 4 15:49:06 2022, Tega, Update, Optical Levers, Simplified sketch on BS table
|
|
|
Message ID: 16753
Entry time: Fri Apr 1 22:22:29 2022
In reply to: 16752
Reply to this: 16755
|
| Author: |
Koji |
| Type: |
Update |
| Category: |
Optical Levers |
| Subject: |
Simplified sketch on MC table |
|
|
Possibility to swap BS and ITMX tables:
BS table, which Tega said MC table, is 2ft x 4ft. The ITMX table is 3ft x 5ft and only the central 2ft x 4ft area is used. The area around the BS table is the narrowest for the east arm. We need at least (2+delta) ft of the hallway width so that we can move the instrument. I'm not yet sure if the ITMX table can be placed there without precise investigation.
|