40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Dec 10 11:07:24 2020, Chub, Update, VAC, UPS fault 
    Reply  Thu Dec 10 11:17:50 2020, Chub, Update, VAC, UPS fault 
Message ID: 15723     Entry time: Thu Dec 10 11:17:50 2020     In reply to: 15722
Author: Chub 
Type: Update 
Category: VAC 
Subject: UPS fault 

I can't find anything in the manual that describes the nature of the FAULT message.  In fact, it's not mentioned at all.  If the unit detects a fault at its output, I would expect a bit more information.  This unit does a programmable level of input error protection, too, usually set at 100%.  Still, there is no indication in the manual whether an input issue would be described as a fault; that usually means a short or lifted ground at the output.

Quote:

Is that a fault code that you can decipher in the manual, or just a light telling you nothing but your UPS is dead?

ELOG V3.1.3-