40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 14073     Entry time: Mon Jul 16 15:07:19 2018
Author: Koji 
Type: Summary 
Category: VAC 
Subject: Oven C vent 

[Steve Koji]

- Attachment1: Removed the thermal cap. Checked the temperature of the oven. It was totally cold.

- Attachment2: Confirmed the RGA section was isolated. The pumps for the RGA was left running.

- Attachment3: Closed the main valve. The pumps for the main volume was left running.

- Attachment4: Started removing the rid. This did not change the gause readings as they were isolated from the venting main volume.

- Attachment5: Opened the rid. Took the components out on a UHV foil bag. The rid was replaced but loosely held by a few screws with the old gasket, just to protect the frange and the volume from rough dusts.

Attachment 1: P_20180716_141512.jpg  598 kB  Uploaded Mon Jul 16 16:07:56 2018  | Show | Hide all | Show all
Attachment 2: P_20180716_141601.jpg  1.164 MB  Uploaded Mon Jul 16 16:08:50 2018  | Hide | Hide all | Show all
P_20180716_141601.jpg
Attachment 3: P_20180716_141610.jpg  1.646 MB  Uploaded Mon Jul 16 16:09:03 2018  | Hide | Hide all | Show all
P_20180716_141610.jpg
Attachment 4: P_20180716_141827.jpg  1.856 MB  Uploaded Mon Jul 16 16:09:58 2018  | Hide | Hide all | Show all
P_20180716_141827.jpg
Attachment 5: P_20180716_143901.jpg  1.302 MB  Uploaded Mon Jul 16 16:10:52 2018  | Hide | Hide all | Show all
P_20180716_143901.jpg
ELOG V3.1.3-