40m QIL Cryo_Lab CTN SUS_Lab CAML OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Jan 20 09:32:19 2015, Steve, Update, PEM, dusty Monday morning dustyMorning.png
    Reply  Fri Feb 6 10:03:23 2015, Steve, Update, PEM, dusty days duststorm.png
       Reply  Mon Apr 27 09:09:15 2015, Steve, Update, PEM, air cond filters checked 400d.png
          Reply  Tue May 29 16:33:04 2018, Steve, Update, PEM, air cond filters replaced 
             Reply  Wed Jun 20 09:16:56 2018, Steve, Update, PEM, dusty lab AP.JPGITMY.JPGITMX.JPGSP.JPG
Message ID: 13990     Entry time: Wed Jun 20 09:16:56 2018     In reply to: 13895
Author: Steve 
Type: Update 
Category: PEM 
Subject: dusty lab 

You should wipe off the table cover before you take it off next time.

It is important to turn up the PSL encloure HEPA Variac voltage if you are working in there. It takes less than 10 minutes to reach lab condition.

Lab air count normal. It is not logged. I have a notebook of particle count on the SP table next to the Met One counter.


Chris replaced some air condition filters and ordered some replacement filter today.



Attachment 1: AP.JPG  6.645 MB  | Hide | Hide all
Attachment 2: ITMY.JPG  5.864 MB  | Hide | Hide all
Attachment 3: ITMX.JPG  4.835 MB  | Hide | Hide all
Attachment 4: SP.JPG  4.670 MB  | Hide | Hide all
ELOG V3.1.3-