40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Wed Jan 17 23:36:12 2018, johannes, Configuration, General, AS port laser injection PSLbeat.svg.pngASpath.svg.png
    Reply  Wed Apr 18 22:46:23 2018, johannes, Configuration, General, AS port laser injection ASpath.svg.pngpower_out_fluctuation_DC.pngpower_out_fluctuation_AC_zoom.png
       Reply  Thu Apr 19 01:04:00 2018, gautam, Configuration, General, AS port laser injection 
          Reply  Thu Apr 19 20:41:09 2018, Koji, Configuration, General, Aux Laser LD dying? (AS port laser injection) Aux_laser_adj_Pout.pdfAux_laser_RIN.pdf
             Reply  Tue Apr 24 08:36:47 2018, johannes, Configuration, General, Aux Laser LD dying? (AS port laser injection) 
       Reply  Thu May 3 10:40:43 2018, johannes, Configuration, General, AS port laser injection mm_solution_AStable.pngAStable_beampath.pdf
          Reply  Thu May 3 12:10:12 2018, gautam, Configuration, General, AS port laser injection 
          Reply  Wed May 23 00:45:18 2018, johannes, Configuration, General, AS port laser injection faraday_location.pdf
Message ID: 13811     Entry time: Thu May 3 12:10:12 2018     In reply to: 13810
Author: gautam 
Type: Configuration 
Category: General 
Subject: AS port laser injection 

I think we need AS55 for locking the configuration Jon suggested - AS55 I and Q were used to lock the SRMI previously, and so I'd like to start from those settings but perhaps there is a way to do this with AS110 I and Q as well.

Quote:
 

What signals are needed for the Guoy phase measurement? Is AS 110 sufficient, or do we need AS55?

 

ELOG V3.1.3-