40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Jun 15 14:24:48 2017, Kaustubh, Jigyasa, Update, Computers, Ottavia Switched On 
    Reply  Thu Jun 15 19:49:03 2017, Kaustubh, Jigyasa, Update, Computers, Ottavia Switched On 
       Reply  Fri Jun 16 12:37:47 2017, Kaustubh, Jigyasa, Update, Computers, Ottavia Switched On 
          Reply  Fri Jun 16 23:27:19 2017, Kaustubh, Jigyasa, Update, Computers, Ottavia Connected to the Netgear Box 
Message ID: 13068     Entry time: Fri Jun 16 12:37:47 2017     In reply to: 13067     Reply to this: 13071
Author: Kaustubh, Jigyasa 
Type: Update 
Category: Computers 
Subject: Ottavia Switched On 

Ottavia had been left running overnight and it seems to work fine. There has been no smell or any noticeable problems in the working. This morning Gautam, Kaustubh and I connected Ottavia to the Matrian Network through the Netgear switch in the 40m lab area. We were able to SSH into Ottavia through Pianosa and access directories. On the ottavia itself we were able to run ipython, access the internet. Since it seems to work out fine, Kaustubh and I are going to enable the ethernet connection to Ottavia and secure the wiring now.  

Quote:

It has been working fine the whole day(we didn't do much testing on it though). We are leaving it on for the night.

Quote:

Today, I and Jigyasa connected the Ottavia to one of the unused monitor screens Donatella. The Ottavia CPU had a label saying 'SMOKED''. One of the past elogs, 11091, dated back in March 2015, by Jenne had an update regarding the Ottavia smelling 'burny'. It seems to be working fine for about 2 hours now. Once it is connected to the Martian Network we can test it further. The Donatella screen we used seems to have a graphic problem, a damage to the display screen. Its a minor issue and does not affect the display that much, but perhaps it'll be better to use another screen if we plan to use the Ottavia in the future. We will power it down if there is an issue with it.

 

 

ELOG V3.1.3-