40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Jun 2 00:54:08 2017, Koji, Update, ASS, Xarm ASS restoration work 7x
    Reply  Fri Jun 2 01:22:50 2017, gautam, Update, ASS, ASS restoration work ASS_Y_recovery.pngASS_Repairs.zipOLs.png
       Reply  Wed Jun 7 14:11:49 2017, gautam, Update, ASS, Y-arm coil driver electronics investigation CoilTFs.pdfY_OL_calib_check.png
          Reply  Wed Jun 7 17:45:11 2017, gautam, Update, ASS, Y-arm coil driver electronics investigation CoilTFs.pdf
             Reply  Thu Jun 8 02:11:28 2017, gautam, Update, ASS, Y-arm coil driver electronics investigation AnalogCheck.pdfAnalogCheck_zoom.pdfArmCtrl.pdf
                Reply  Mon Jun 12 17:42:39 2017, gautam, Update, ASS, ETMY Oplev Pentek board pulled out 
                   Reply  Wed Jun 14 18:15:06 2017, gautam, Update, ASS, ETMY Oplev restored 
                      Reply  Thu Jun 15 01:56:50 2017, gautam, Update, ASS, ETMY Oplev restored ITMY_OLspec.pdf
                         Reply  Tue Jun 27 16:11:28 2017, gautam, Update, Electronics, Coil whitening ETMYT_1182669422.mp4ITMY_whitening_studies.pdf
Message ID: 13060     Entry time: Mon Jun 12 17:42:39 2017     In reply to: 13052     Reply to this: 13063
Author: gautam 
Type: Update 
Category: ASS 
Subject: ETMY Oplev Pentek board pulled out 

As part of my Oplev servo investigations, I have pulled out the Pentek Generic Whitening board (D020432) from the Y-end electronics rack. ETMY watchdog was shutdown for this, I will restore it once the Oplev is re-installed.

ELOG V3.1.3-