40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Nov 17 15:17:16 2016, gautam, Update, IMC, MCL Feedback MCLerror.pdfMCLtest.pngYarmCtrl.pdf
    Reply  Wed Nov 23 01:13:02 2016, gautam, Update, IMC, MCL Feedback MCL_plant.pdfOLG.pdfMC_armSpectra_X.pdfMC_armSpectra_Y.pdf
       Reply  Wed Nov 23 15:08:56 2016, rana, Update, IMC, MCL Feedback 
          Reply  Fri Feb 3 00:36:52 2017, gautam, Update, IMC, MCL Feedback - framing the problem 
             Reply  Fri Feb 3 11:40:09 2017, rana, Update, IMC, MCL Feedback - framing the problem 
                Reply  Mon Feb 6 17:03:41 2017, gautam, Update, IMC, MCL Feedback - simulink model updated mc40_v1.pdf
                   Reply  Mon Feb 6 18:20:08 2017, Koji, Update, IMC, MCL Feedback - simulink model updated 
                      Reply  Wed Feb 8 19:13:02 2017, gautam, Update, IMC, MCL Feedback - TF measurements 
                         Reply  Thu Feb 9 23:35:34 2017, gautam, Update, IMC, MCL Feedback - TF measurements mc40_v1.pdfCMboard_OLTF_fit.pdfFSSFast_OLTF_fit.pdfPCdrive_OLTF_measured.pdfdata.zip
Message ID: 12637     Entry time: Wed Nov 23 15:08:56 2016     In reply to: 12635     Reply to this: 12793
Author: rana 
Type: Update 
Category: IMC 
Subject: MCL Feedback 

In the Generic Pentek interface board, which is used to take in the analog 2-pin LEMO cable from the MC Servo board, there is some analog whitening before the signal is sent into the ADC.

There are jumpers in there to set whether it is 0, 1, or 2 stages of 150:15 (z:p) whitening.

ELOG V3.1.3-