40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
40m Log |
Not logged in |
 |
|
Fri Jun 10 16:19:03 2016, ericq, Update, SUS, ETMX watch
|
Mon Jun 13 10:01:58 2016, Steve, Update, SUS, ETMX jumps 
|
Tue Jun 14 15:55:17 2016, ericq, Update, SUS, ETMX watch
|
Tue Jun 14 16:53:16 2016, rana, Update, SUS, ETMX watch
|
Thu Jun 16 11:10:17 2016, Steve, Update, SUS, spare ETMX optics preparation to be hanged    
|
Tue Jun 28 09:14:27 2016, Steve, Update, SUS, ETMX optics preparation to be rehanged
|
Wed Jun 29 08:20:04 2016, Steve, Update, SUS, First Contact shelf life
|
Wed Jun 29 14:32:22 2016, Steve, Update, SUS, how to remove epoxy from optics
|
Wed Jun 29 16:02:29 2016, Steve, Update, SUS, ETMX beam baffle
|
Thu Jun 30 10:03:16 2016, Steve, Update, SUS, how to remove epoxy from optics 
|
Thu Jun 30 14:31:02 2016, Chemistry, Update, SUS, NO
|
Tue Jul 5 09:25:31 2016, Steve, Update, SUS, how to remove epoxy from optics 
|
Thu Jul 7 09:13:54 2016, Steve, Update, SUS, SOS gluing fixture    
|
|
Message ID: 12171
Entry time: Mon Jun 13 10:01:58 2016
In reply to: 12168
|
Author: |
Steve |
Type: |
Update |
Category: |
SUS |
Subject: |
ETMX jumps |
|
|
Quote: |
ETMX has been jumping around again lately. Just now, I zeroed the ETMX alignment offsets in the SUS model, and centered the ETMX oplev spot via slow machine sliders. OSEM damping is on, oplev damping is off. Let's see how it moves around in the next day or so.
GPS: 1149635923
UTC: Jun 10 2016 23:18:26
|
|
|
|
|
|