40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
40m Log |
Not logged in |
 |
|
Tue Dec 1 17:16:31 2015, gautam, Update, CDS, Script for copying BLRMS filters
|
Wed Dec 2 18:54:20 2015, gautam, Update, CDS, Changes to C1MCS, C1PEM
|
Thu Dec 3 18:18:48 2015, gautam, Update, CDS, BLRMS for optics suspensions - library block
|
Fri Dec 4 18:20:36 2015, gautam, Update, CDS, BLRMS for IMC setup 
|
Mon Dec 7 00:45:28 2015, ericq, Update, CDS, daqd is mad
|
Mon Dec 7 10:45:21 2015, ericq, Update, CDS, daqd is mad
|
Mon Dec 7 11:25:10 2015, jamie, Update, CDS, daqd is mad
|
Mon Dec 14 23:56:29 2015, ericq, Update, CDS, c1pem reverted
|
Tue Apr 5 14:16:34 2016, gautam, Update, CDS, BLRMS for optics suspensions - library block UPDATED
|
Wed Nov 2 22:56:45 2016, gautam, Update, CDS, c1pem revamped
|
Thu Nov 3 12:38:42 2016, gautam, Update, CDS, c1pem revamped
|
Thu Nov 3 13:36:16 2016, ericq, Update, CDS, c1pem revamped
|
Fri Jan 27 21:21:35 2017, gautam, Update, CDS, c1pem revamped
|
|
Message ID: 12064
Entry time: Tue Apr 5 14:16:34 2016
In reply to: 11844
Reply to this: 12592
|
Author: |
gautam |
Type: |
Update |
Category: |
CDS |
Subject: |
BLRMS for optics suspensions - library block UPDATED |
|
|
As discussed in a Wednesday meeting some time ago, we don't need to be writing channels from BLRMS filter modules to frames at 16k (we suspect this is leading to the frequent daqd crashes which were seen the last time we tried setting BLRMS up for all the suspensions). EricQ pointed out to me that there conveniently exists a library block that is much better suited to our purposes, called BLRMS_2k. I've replaced all the BLRMS library blocks in the sus_single_BLRMS library block that I made with there BLRMS_2k blocks. I need to check that the filters used by the BLRMS_2k block (which reside in /opt/rtcds/userapps/release/cds/common/src/BLRMSFILTER.c) are appropriate, after which we can give setting up BLRMS for all the suspensions a second try... |