40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
40m Log |
Not logged in |
 |
|
Tue Dec 1 17:16:31 2015, gautam, Update, CDS, Script for copying BLRMS filters
|
Wed Dec 2 18:54:20 2015, gautam, Update, CDS, Changes to C1MCS, C1PEM
|
Thu Dec 3 18:18:48 2015, gautam, Update, CDS, BLRMS for optics suspensions - library block
|
Fri Dec 4 18:20:36 2015, gautam, Update, CDS, BLRMS for IMC setup 
|
Mon Dec 7 00:45:28 2015, ericq, Update, CDS, daqd is mad
|
Mon Dec 7 10:45:21 2015, ericq, Update, CDS, daqd is mad
|
Mon Dec 7 11:25:10 2015, jamie, Update, CDS, daqd is mad
|
Mon Dec 14 23:56:29 2015, ericq, Update, CDS, c1pem reverted
|
Tue Apr 5 14:16:34 2016, gautam, Update, CDS, BLRMS for optics suspensions - library block UPDATED
|
Wed Nov 2 22:56:45 2016, gautam, Update, CDS, c1pem revamped
|
Thu Nov 3 12:38:42 2016, gautam, Update, CDS, c1pem revamped
|
Thu Nov 3 13:36:16 2016, ericq, Update, CDS, c1pem revamped
|
Fri Jan 27 21:21:35 2017, gautam, Update, CDS, c1pem revamped
|
|
Message ID: 11833
Entry time: Tue Dec 1 17:16:31 2015
Reply to this: 11840
|
Author: |
gautam |
Type: |
Update |
Category: |
CDS |
Subject: |
Script for copying BLRMS filters |
|
|
We've been talking about putting in BLRMS filters for several channels - it would be a pain to manually copy over the correct bandpass and lowpass filter coefficients into the newly created filter banks, and so I've set up a script (attached) that can do the job. As template filters, I'vm using the filters rana detailed here. Essentially, what the script does is identify the (empty on creation) block of text for a given filter: e.g. RMS_STS1Z_BP_0p01_0p03 for STS1Z), and appends the template filter coefficients. To test my script, I first backed up the original C1PEM.txt file from /opt/rtcds/caltech/c1/chans, removed all the filter coefficients for the STS1Z BLRMS filters, and then replaced it with one generated using my script. I then loaded the coefficients for all the filters in the C1PEM modules, without any obvious error messages being generated. I also checked that foton could read the new file, and checked tmake sure that sensible filter shapes were seen for some channels. Since this seems to be working, I'm going to start putting in BLRMS blocks into the models tomorrow. |
|