40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 11689     Entry time: Wed Oct 14 16:53:22 2015
Author: Koji 
Type: Update 
Category: General 
Subject: Non inverting buffer for SR560 

Eric needed a buffer to drive low input impedance (~130Ohm) of his pomona box, I quickly made a non-iverting buffer with G=+10. The DC power is obtained from the back of SR560. It uses 1.02K and 9.09K
to have the gain of ~10. The chip is OP27. In fact this limits the output swing to be +/-5V for the load resistance of 130Ohm. Eric thinks this is enough. If we need more, we need to swap the chip.

As SR560s tend to saturate too quickly, it would be very useful to have this kind of kit in all the labs
once it is packed in a box.

Attachment 1: IMG_20151014_145608547.jpg  1.999 MB  | Hide | Hide all
IMG_20151014_145608547.jpg
Attachment 2: IMG_20151014_145548751.jpg  224 kB  | Hide | Hide all
IMG_20151014_145548751.jpg
ELOG V3.1.3-