40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Sep 18 13:33:17 2015, ericq, Update, LSC, Fast ALS troubles - Noise at 36kHz IRlock_noises.pdf
    Reply  Fri Sep 18 16:08:41 2015, ericq, Update, LSC, Fast ALS troubles - Noise at 36kHz PRMIlock_REFLspectra.pdfIMCspectrum.pdf
       Reply  Fri Sep 18 19:15:35 2015, rana, Update, LSC, Fast ALS troubles - Noise at 36kHz 
    Reply  Tue Sep 29 16:52:49 2015, ericq, Update, LSC, Fast ALS troubles - unknown zero OLG_fastALS.pdf
       Reply  Tue Sep 29 18:03:11 2015, rana, Update, LSC, use LISO Screen_Shot_2015-09-29_at_5.55.34_PM.png
          Reply  Wed Sep 30 10:00:02 2015, ericq, Update, LSC, used LISO 
       Reply  Fri Oct 2 03:29:16 2015, ericq, Update, LSC, Fast ALS progress - AO path crossed over, but no high BW crossedover.pdf
          Reply  Fri Oct 9 13:31:21 2015, ericq, Update, LSC, ALS plant shape xarm_plantTFs.pdf
             Reply  Fri Oct 9 14:50:18 2015, Koji, Update, LSC, ALS plant shape 
                Reply  Fri Oct 9 16:23:25 2015, ericq, Update, LSC, ALS plant shape 
                   Reply  Tue Oct 13 16:28:21 2015, ericq, Update, LSC, Fast ALS pomona liso_lp.zip2LPfit.pdf
Message ID: 11651     Entry time: Wed Sep 30 10:00:02 2015     In reply to: 11649
Author: ericq 
Type: Update 
Category: LSC 
Subject: used LISO 

LISO confirms that I did my algebra right in picking the component values, and shows no extra zeros. 

I also took some TFs with the SR785 and confirmed that both CM board inputs behave the same, and that including the LPF on the input gives the expected 1/f shape at the slow and fast outputs.

ELOG V3.1.3-