40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Sep 18 13:33:17 2015, ericq, Update, LSC, Fast ALS troubles - Noise at 36kHz IRlock_noises.pdf
    Reply  Fri Sep 18 16:08:41 2015, ericq, Update, LSC, Fast ALS troubles - Noise at 36kHz PRMIlock_REFLspectra.pdfIMCspectrum.pdf
       Reply  Fri Sep 18 19:15:35 2015, rana, Update, LSC, Fast ALS troubles - Noise at 36kHz 
    Reply  Tue Sep 29 16:52:49 2015, ericq, Update, LSC, Fast ALS troubles - unknown zero OLG_fastALS.pdf
       Reply  Tue Sep 29 18:03:11 2015, rana, Update, LSC, use LISO Screen_Shot_2015-09-29_at_5.55.34_PM.png
          Reply  Wed Sep 30 10:00:02 2015, ericq, Update, LSC, used LISO 
       Reply  Fri Oct 2 03:29:16 2015, ericq, Update, LSC, Fast ALS progress - AO path crossed over, but no high BW crossedover.pdf
          Reply  Fri Oct 9 13:31:21 2015, ericq, Update, LSC, ALS plant shape xarm_plantTFs.pdf
             Reply  Fri Oct 9 14:50:18 2015, Koji, Update, LSC, ALS plant shape 
                Reply  Fri Oct 9 16:23:25 2015, ericq, Update, LSC, ALS plant shape 
                   Reply  Tue Oct 13 16:28:21 2015, ericq, Update, LSC, Fast ALS pomona liso_lp.zip2LPfit.pdf
Message ID: 11621     Entry time: Fri Sep 18 16:08:41 2015     In reply to: 11620     Reply to this: 11622
Author: ericq 
Type: Update 
Category: LSC 
Subject: Fast ALS troubles - Noise at 36kHz 

 I looked at REFL11 and REFL55 during PRMI lock - the line is there.

In fact, it is even visible in REFL11 I from a single bounce off of the PRM (ITMs misaligned).

This led me to look at the IMC error point (via the OUT2 on the servo board, no compensation for the input gain). Also there!

Attachment 1: PRMIlock_REFLspectra.pdf  52 kB  | Hide | Hide all
PRMIlock_REFLspectra.pdf
Attachment 2: IMCspectrum.pdf  25 kB  | Hide | Hide all
IMCspectrum.pdf
ELOG V3.1.3-