40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Thu Jul 9 16:39:03 2015, Koji, Configuration, General, How to set up your own summary page environment on the LDG cluster 
    Reply  Mon Jul 13 18:27:27 2015, Eve, Configuration, General, How to set up your own summary page environment on the LDG cluster 
Message ID: 11405     Entry time: Mon Jul 13 18:27:27 2015     In reply to: 11399
Author: Eve 
Type: Configuration 
Category: General 
Subject: How to set up your own summary page environment on the LDG cluster 

I'd like to build off of Koji's instructions with a few useful tips I discovered while setting up my own summary page environment.

To only make a specified selection of tabs for the summary pages, copy only the corresponding .ini files into /home/albert.einstein/summary/config and run the gw_daily_summary_custom following Koji's instructions below. When asked for nodus's password either hit "enter" three times without providing the password or comment out this section of the code to stop the summary page creation process from taking current data files from nodus. This is especially helpful when the 40m is down (like it is now).

After running the summary page code, the pages can be viewed at https://ldas-jobs.ligo.caltech.edu/~albert.einstein/summary/day/YYYYMMDD/ and corresponding error logs can be found at ~/public_html/summary/logs/gw_summary_pipe_local-687496-0.err.

ELOG V3.1.3-