The CDS upgrade is now underway

Here's what's happened so far:

• Installed and linked in all the RTS supporting software packages in /opt/rtapps (only on front end machines and fb):

  controls@c1lsc ~ 2$ find /opt/rtapps/ -mindepth 1 -maxdepth 1 -type l -ls
  12582916    0 lrwxrwxrwx   1 controls 1001           12 Jul  1 13:16 /opt/rtapps/gds -> gds-2.16.3.2
  12603452    0 lrwxrwxrwx   1 controls 1001           10 Jul  1 13:17 /opt/rtapps/fftw -> fftw-3.3.2
  12603451    0 lrwxrwxrwx   1 controls 1001           15 Jul  1 13:16 /opt/rtapps/libframe -> libframe-8.17.2
  12603450    0 lrwxrwxrwx   1 controls 1001           13 Jul  1 13:16 /opt/rtapps/libmetaio -> libmetaio-8.2
  12582915    0 lrwxrwxrwx   1 controls 1001           34 Jul  1 15:24 /opt/rtapps/framecpp -> ldas-tools-1.19.32-p1/linux-x86_64
  12582914    0 lrwxrwxrwx   1 controls 1001           20 Jul  1 13:15 /opt/rtapps/epics -> epics-3.14.12.2_long

• Checked out the RTS source for the version we'll be using: 2.9.4

/opt/rtcds/rtscore/tags/advLigoRTS-2.9.4

• built and installed all of the RTS components:
  • mbuf
  • mx_stream
  • daqd
  • nds
  • awgtpman
     
• mx_stream is not working. Unknown why. It won't start on the front end machines (only tested on c1lsc so far) with the following error:

  controls@c1lsc ~ 1$ /opt/rtcds/caltech/c1/target/fb/mx_stream -s c1x04 c1lsc c1ass c1oaf c1cal -d fb:0
  mmapped address is 0x7ff7b71a0000
  send len = 263596
  mx_connect failed Remote Endpoint is Closed
  controls@c1lsc ~ 1$
  

  Have contact Keith T. and Rolf B. for backup.  This is a blocker, since this is what ferries the data from the front ends.
   
• Rebuilt almost all models.  This was good.  Initially nothing would compile because of IPC creation errors, so I moved the old chans/ipc/C1.ipc file out of the way and generated a new one and then everything compiled (of course senders have to be compiled before receivers).
  I only had to fix a couple of things in the models themselves:
  • c1ioo - unterminated FiltCtrl inputs
  • C1_SUS_SINGLE_CONTROL - unterminated FiltCtrl inputs
  • c1oaf - bad part named "STATIC". There is some hacky namespace stuff going on in the RCG. I was able to just explode that part and it now works.
  • c1lsc - unterminated FiltCtrl inputs
  Haven't installed or tried to run anything yet, but the fact they compile is good.
  Some models are not compiling because they have C code in src blocks that are throwing errors:
  • c1lsc
  • c1cal
  It shouldn't be too hard to fix whatever is causing those compile errors.

That's it for today.  Will pick up again first thing tomorrow