40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
 List  |  Find  |  Login  |  Help 
Entry  Fri Dec 26 17:45:21 2014, Steve, Update, VAC, vac pressure rose to 1.3 mTorr noN2.pngbacktoVacNormal.png
    Reply  Sun Dec 28 07:29:16 2014, Steve, Update, VAC, vacuum is normal 3d.png
    Reply  Tue Feb 3 15:20:13 2015, Steve, Koji, Update, VAC, Pneumatic pressure is being read again N2pressureReadingIsBack.png
    Reply  Sun Mar 22 18:42:40 2015, Steve, Update, VAC, vac pressure rose to 1.2mTorr NoN2.pngPressureReadingWorks.png
       Reply  Mon Mar 23 10:36:55 2015, ericq, Update, VAC, Pressure watch script 
          Reply  Fri Apr 24 17:30:32 2015, Jenne, Update, VAC, Pressure watch script broken 
             Reply  Sat Apr 25 18:50:47 2015, ericq, Update, VAC, Pressure watch script broken 
                Reply  Sat Apr 25 22:17:49 2015, rana, Update, CDS, MXstream restart script working (beta) 
                   Reply  Tue May 19 17:03:34 2015, Koji, Update, CDS, MXstream restart script working (beta) 
                      Reply  Tue May 19 18:38:33 2015, rana, Update, CDS, MXstream restart script working (beta) 
          Reply  Mon Apr 27 14:37:55 2015, Steve, Update, VAC, N2 pneumatic pressure watch  
             Reply  Thu Apr 30 16:30:25 2015, Steve, Update, VAC, N2 pneumatic pressure watch set up 
          Reply  Tue Jan 31 14:14:29 2017, rana, Update, VAC, Pressure watch script 
       Reply  Sun May 15 19:48:08 2016, Steve, Update, VAC, run out of N2 noN2.png
          Reply  Tue Jun 14 10:13:34 2016, Steve, Update, VAC, temporary N2 supply line afterN2work.png
             Reply  Fri Jun 17 15:22:31 2016, gautam, Update, VAC, N2 supply line restored after retiling c0vac_06172016.png
Message ID: 11314     Entry time: Tue May 19 18:38:33 2015     In reply to: 11312
Author: rana 
Type: Update 
Category: CDS 
Subject: MXstream restart script working (beta) 

Good catch; that was some seriously bad programming on my part. I had some undeclared variable garbage going on. I fixed it and re-implemented the script in CRON on megatron. The log file shows that it has detected no problems for the last several checks. I'll check it again tomorrow to see if its doing good or bad.

ELOG V3.1.3-