I'd like to get a concrete list of measurements written down, so that it's clear what needs to be done before I graduate.

Noise couplings:

• Laser amplitude noise coupling to DARM
  • We don't have an AOM for ISS right now, but we should be able to just stick it back in the beam path, right?  I think Koji checked that the AOM was all okey-dokey recently.
  • AOM calibration should tell me how much the single-pass amplitude changes as a function of input signal.
• Laser frequency noise coupling to DARM
  • Inject signal at the CM board input, which should be calibrated by looking at response to calibrated MC2 motion.
• Marconi phase noise coupling to DARM
  • Marconi can produce internally or accept via BNC 0-10 rad of phase modulation.  Marconi spec sheet should give me rad/V for the input calibration.
• Marconi amplitude noise coupling to DARM
  • Using external input of Marconi.  Marconi spec sheet should give me input calibration.
• MICH err to DARM
  • Compare with Optickle model
• PRCL err to DARM
  • Compare with Optickle model

Noise cancellation:

• PRC angle
• MICH noise removed from DARM (compare flat gain FF vs. Wiener FF)
• PRCL noise removed from DARM (compare FF shape from model vs. Wiener FF)
• MC length noise (equiv. to laser freq noise) removed from CARM & DARM

Are there things that I'm missing?  I've never had an IFO to characterize before.