40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Message ID: 1086     Entry time: Fri Oct 24 17:21:13 2008
Author: Alberto 
Type: Update 
Category: General 
Subject: Abs length: the right amount of beam clipping 
I found the reason why the peak at about 6.3MHz appeared only on the TEM10 mode: the blade was clipping the beam too much and it was probably totally killing the mode. I'm attaching a plot that shows that difference when I did that.
Attachment 1: 24OCT08_levels_of_clipping_comparison.png  10 kB  | Hide | Hide all
24OCT08_levels_of_clipping_comparison.png
ELOG V3.1.3-