40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Nov 11 19:46:35 2014, diego, Update, Computer Scripts / Programs, Status of the new nodus 
    Reply  Wed Dec 10 14:22:37 2014, diego, Update, Computer Scripts / Programs, Status of the new nodus 
       Reply  Fri Dec 12 19:38:49 2014, diego, Update, Computer Scripts / Programs, Status of the new nodus 
          Reply  Mon Dec 15 12:53:13 2014, ericq, Update, Computer Scripts / Programs, Status of the new nodus 
             Reply  Mon Dec 15 16:27:57 2014, diego, Update, Computer Scripts / Programs, Status of the new nodus 
                Reply  Tue Dec 16 20:49:25 2014, diego, Update, Computer Scripts / Programs, Status of the new nodus 
Message ID: 10772     Entry time: Wed Dec 10 14:22:37 2014     In reply to: 10697     Reply to this: 10793
Author: diego 
Type: Update 
Category: Computer Scripts / Programs 
Subject: Status of the new nodus 

[Diego, Steve]

We ran a Cat 6+ Ethernet cable from the 1X7 rack (where the new nodus is located) to the fast GC switch in the control room rack; now I will learn how to setup the 'outside world' network, iptables, and the like.

 

I remind that the current hardware/software status is posted in elog 10697 ; if additions or corrections are needed, let me know.

 

After I check a couple of things, we can use the new nodus (which is currently known in the martian network as rosalba) as a local test to see that everything is working. After that (and, mostly, after I'll have the network working), we will sync the data from the old nodus to the new one and make the switch.

ELOG V3.1.3-