40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Fri Nov 14 08:25:29 2014, Steve, Update, SUS, morning issues morning.png
    Reply  Fri Nov 14 11:07:59 2014, manasa, Update, CDS, Not able to run models on FE machines CDSissue.png
       Reply  Fri Nov 14 15:45:34 2014, Jenne, Update, CDS, Computers back up after reboot 
Message ID: 10715     Entry time: Fri Nov 14 11:07:59 2014     In reply to: 10714     Reply to this: 10717
Author: manasa 
Type: Update 
Category: CDS 
Subject: Not able to run models on FE machines 

Quote:

PRM, SRM and the ENDs are kicking up.  Computers are down.  PMC slider is stuck at low voltage.

Still not able to resolve the issue.

Except for c1lsc, the models are not running on any of the FE machines . I can ssh into all the machines but could not restart the models on the FE using the usual rtcds restart <modelname>

Something happened around 4AM (inferring from the Striptool on the wall) and the models have not been running since then.

 

Attachment 1: CDSissue.png  35 kB  | Hide | Hide all
CDSissue.png
ELOG V3.1.3-