|
40m
QIL
Cryo_Lab
CTN
SUS_Lab
TCS_Lab
OMC_Lab
CRIME_Lab
FEA
ENG_Labs
OptContFac
Mariner
WBEEShop
|
| 40m Log |
Not logged in |
 |
|
|
 Fri Sep 5 15:28:38 2014, Steve, Update, SUS, HeNe laser test preparation 
|
 Fri Sep 5 16:25:36 2014, Steve, Update, SUS, center ITMY oplev
| |
Tue Sep 9 08:22:28 2014, Steve, Update, SUS, HeNe laser test preparation
| |
Tue Sep 9 16:59:32 2014, Steve, Update, SUS, HeNe laser test preparation
| |
Wed Sep 10 14:58:58 2014, Jenne, Update, SUS, OpLev test: New channels
| |
Thu Sep 11 17:12:42 2014, Steve, Update, SUS, OpLev test: old SP qpd connected
| |
Fri Sep 12 16:30:48 2014, Steve, Update, SUS, HeNe laser test preparation
| |
Wed Sep 17 13:41:00 2014, Jenne, Update, SUS, New calibrated channels for test QPD
| |
Thu Sep 18 09:17:47 2014, Steve, Update, SUS, HeNe laser test
| |
Mon Sep 22 10:14:07 2014, Steve, Update, SUS, HeNe laser test
| |
Tue Sep 23 08:34:14 2014, Steve, Update, SUS, HeNe laser test
| |
Thu Sep 25 10:53:32 2014, Steve, Update, SUS, HeNe laser test
| |
Wed Sep 10 15:31:16 2014, Steve, Update, SUS, HeNe laser test preparation
| |
Wed Oct 15 17:09:49 2014, manasa, Update, General, Diode laser test preparation
| |
Wed Oct 29 18:07:28 2014, manasa, Update, General, Diode laser test preparation
|
|
|
Message ID: 10651
Entry time: Wed Oct 29 18:07:28 2014
In reply to: 10610
|
| Author: |
manasa |
| Type: |
Update |
| Category: |
General |
| Subject: |
Diode laser test preparation |
|
|
I ran 3 BNC cables from the SP table to 1X7 rack so that we can have 16 bit channels for the Ontrak PD that will be used to test oplev lasers. The BNC cables are plugged to the Ch 29, 30 & 31 that were already created for this purpose (elog 10488) |