40m QIL Cryo_Lab CTN SUS_Lab TCS_Lab OMC_Lab CRIME_Lab FEA ENG_Labs OptContFac Mariner WBEEShop
  40m Log  Not logged in ELOG logo
Entry  Tue Sep 16 10:47:52 2014, Steve, Update, PSL, Laser turned on 
    Reply  Tue Sep 16 14:26:45 2014, ericq, Update, PSL, Laser turned on 
    Reply  Tue Sep 16 16:03:36 2014, Koji, Update, PSL, Laser turned on 
Message ID: 10509     Entry time: Tue Sep 16 14:26:45 2014     In reply to: 10508
Author: ericq 
Type: Update 
Category: PSL 
Subject: Laser turned on 


 Our janitor turned off the laser accidentally. 

 The PMC wasn't locking very happily after this. I tweaked the pointing onto the PMC REFL diode, to make sure it was centered, and touched the alignment into the PMC. I also reset the FSS Slow output to zero. It took a little while for the laser to settle in, for some reason, but the transmission is up at 0.80 now. 

Tweaked MC2 pointing to get the MC transmission high enough to let WFS kick in, which nicely got the rest of the MC alignment done. After that, I offloaded the WFS into the MC suspensions. 

Lastly, I ran the command that Rana posted in ELOG 10391, to set the FSS input offset (From -0.18 to -0.06)

ELOG V3.1.3-