- PMC suddenly refused to lock.
- Investigated what's wrong
- Finally, I touched RF Output Adjust (C1:PSL-PMC_RFADJ). Then it started locking.
- C1:PSL-PMC_RFADJ was set to 2.0 by rana when we looked at the PMC LO issue.
Now PMC does not lock with this value. I set it to 6.0 so that the lock is robust.
- Right before I lost PMC locking, I had some difficulty in locking IMC. Of course, the robustness of the PMC is related to the robustness of the IMC.
We definitely need to investigate this. (RF powers, open loop TF, etc)